How do I change the code on my keypad?

You can change the Rosslare keypad codes through the programming section of the keypad. You will need the Programming Installation code to do this, which is usually written on the front of the manual at handover. If you are missing this code, please contact Intelligent Home.

1. Press the # key two times within 2 seconds. The left LED should turn off and the right LED should illuminate RED.
2. Enter your 4-digit Programming code, the right LED will turn GREEN.
3. Press “1” to enter the Open Code Menu, the left LED will turn RED.
4. Enter your new 4-digit PIN code.
5. The Rosslare will now exit Programming mode and return the left LED to GREEN.

If you have a dual code system repeat:

1. Press the # key two times within 2 seconds. The left LED should turn off and the right LED should illuminate RED.
2. Enter your 4-digit Programming code, the right LED will turn GREEN.
3. Press “2” to enter the Open Code Menu, the left LED will turn ORANGE.
4. Enter your new 4-digit PIN code.
5. The Rosslare will now exit Programming mode and return the left LED to GREEN.