Intelligent Home Support Center

How do I extend the time that my gate or door is open for?

You can change the Rosslare open times through the programming section of the keypad. You will need the Programming Installation code to do this, which is usually written on the front of the manual at handover. If you are missing this code, please contact Intelligent Home.

  1. Press the # key two times within 2 seconds. The left LED should turn off, and the right LED should illuminate RED.
  2. Enter your 4-digit Programming code, the right LED will turn GREEN.
  3. Press “6” to enter the Door Lock Menu, and the left LED will turn RED.
  4. Enter the new time in 4 digits – e.g., 2 seconds will be 0002.
  5. The Rosslare will now exit Programming mode and return the left LED to GREEN.